SAMES KREMLIN Nanogun Airmix, Руководство пользователя

Страница: 17 / 78

Index revision : D - March 2018 17 7115
4.2. Flows
4.2.1. Versions without whip (LR)
Flat spray
:
Nota: The flow rate measurements were conducted with water.The width of the impact is
measured at a distance of 25 cm (10 inches).
Hollow cone round spray
:
Note: The hollow cone only gives good results at high product pressures; we do not recommend
working below 140 bar. The best results are obtained between 160 and 200 bar.
Gauge
Flow rate (in cc/min) Width, in
cm
at 70 bar at 120 bar at 200 bar
03-05 150 200 260 12
03-07 150 200 260 17
04-05 220 290 380 12
04-07 220 290 380 17
04-09 220 290 380 21
04-11 220 290 380 25
04-13 220 290 380 29
06-09 330 430 570 21
06-11 330 430 570 25
06-13 330 430 570 29
06-15 330 430 570 33
09-09 450 590 770 21
09-11 450 590 770 25
09-13 450 590 770 29
09-15 450 590 770 33
12-11 600 790 1030 25
12-13 600 790 1030 29
12-15 600 790 1030 33
14-09 720 940 1230 21
14-11 720 940 1230 25
14-13 720 940 1230 29
14-15 720 940 1230 33
14-17 720 940 1230 37
Gauge Flow rate (in cc/min)
Impact diameter
at 250 mm
Impact diameter
at 250 mm
Dynamic air
pressure
Nanogun 120 bar
Spraying air
4 bars
Nanogun 200 bar
Spraying air
4 bars
Dynamic
product pressure
120 140 200 140 200
K20 250 260 330 100 110
K30 320 350 420 110 120
K40 400 440 540 110 120
K50 580 600 780 120 130
K60 900 1000 1200 120 130
K70 900 1000 1200 120 130