Version B June, 2020
19
MagnaRam-SK
4 Installation
Installation Instructions:
4.1 Locate
MagnaRam.
a. Place MagnaRam in desired location and anchor to the floor.
b. Verify that raised height clearance is at least 150+inches (381cm).
c. Leave enough room to walk around- Minimum of 3ft (1meter).
i. The front must be clear for loading.
d. The MagnaRam must be level to operate correctly – shimming may be required.
e. Use anchors large enough that exceed the force of elevator. (3/4-1in. anchors)
4.2 Grounding the pump.
a. Use the supplied ground connector.
b.
Unscrew the locknut (A), Place the ground wire (D) between the (B) washer Tighten the locknut.
c.
Connect the other end of the wire to an earth "ground".
d. A qualified electrician must check the ground continuity.
a.
It must be less than
1.0
Ω
.
b.
If the continuity is not correct, check the terminal, the electric wire, the U bolt and the ground
point.
Do Not operate until the system is properly grounded.
Minimum 3 feet around sides and back
Keep front clear
Installation
Содержание Magna-Ram
