SAMES KREMLIN Inobox, Руководство пользователя, Страница: 39 / 42

Index revision : A 39 7145
10.2.2. From Inobox to a CAN module
8 bytes of feedback are exchanged fom Inobox to a CAN module
Byte Label Description Unit Max.
0 Status 1
Status information 1(see description hereafter)
-
-
1 Status 2
Status information 2 (see description hereafter)
-
-
2 Fault 1
Fault information 1 (see description hereafter)
-
-
3 Fault 2 Fault information 2 (see description hereafter)
-
-
4 HV ouput current µA 110
5 HV ouput voltage kV 100
6
Injection or Blowing flow
rates
Bit 8 =0 Injection on 7bits in l/min
Bit 8=1 blowing on 7 bits in dl/min
L/min or
dl/min
110/90
7
Dilution or fluidisation flow
rates
Bit 8=1 Fluidisation on 7 bits in L/min if big valve
or dL/min if small valve
L/min or
dl/min
70
Byte 0 Statut 1 Status information 1
7 Initialisation Software in initialization step
6
5
High voltage ON High Voltage is effectively active
4 HV request OK The HV request is taken into account by the Inobox
3 External cleaning
External cleaning is requested (1 on the input), it will be taken into
account if the PLC has not requested cleaning control
2 External HV trigger
External HV trigger is requested (1 on the input), it will be taken
into account if the PLC has not requested HV control
1 Cleaning request OK The cleaning start request is taken into account by theInobox
0 Cleaning in pogress
A cleaning is in progress (the air controls are at maximum, there is
no controlled HV)
Byte 1 Statut 2 Status information 2
7 Manual spray gun A manual spray gun is connected (if set to 1)
6 Fault with 24V cutoff Resettable fault only after a 24V shutdown
5
Configured communica-
tion module
The communication module is configured
4 Fault A fault is present
3 Wireless control - reserved Control mode by wireless - reserved
2 CAN Control Control mode by the CAN communication
1 USB Control - reserved Control mode by the USB software - reserved
0 PLC Control Control mode by the PLC (via the communication module)