SAMES KREMLIN
- 4 -
N° : 578.229.110-UK-1912
NEEDLE PACKING (IND. 13) REPLACEMENT
Make sure there is no more paint inside the gun.
Unscrew the needle stop (22) and remove the needle spring (20).
Remove the needle (11) completely by the rear part of the gun.
Dismount the trigger (36) by removing the screw (39) and the trigger spindle (38) by means of two
wrenches n° 5.5.
Unscrew the packing holder (16) by means of the wrench supplied with the gun.
Take off the needle packing (13) that consists of a seat (14) and a bearing (15).
Insert the bearing (15) into the seat (14) and replace the whole in the gun.
Screw the packing holder (16) moderately.
Reinstall the needle (11).
Reinstall the lubricated needle spring (20) and the needle stop (22).
Tighten up the packing holder (16) by means of the wrench supplied with the gun and unscrew it by
a 1/4 turn.
Remount the trigger (36).
Feed paint
If there is a leak, screw slightly.
AIR VALVE (IND. 23) REPLACEMENT
Unscrew the needle stop (22), then remove the needle spring (20) and the needle (11) by the rear
part of the gun.
Trigger the gun (36) then unscrew the needle stop sleeve (17) by means of the wrench supplied
with the gun.
Take off the valve spring (29) as well as the air valve body (24), the air valve stop (30) and the
carrier (28).
Reinstall the carrier (28) on the new air valve body (24).
Install that new assembly, the air valve stop (30), the lubricated valve spring (29) into the gun body.
Screw the needle stop sleeve (17).
Reinstall the needle (11), the lubricated needle spring (20) and the needle stop (22).
AIR VALVE SEAL (IND. 26) REPLACEMENT
Take off the air valve (23) - refer to previous paragraph.
Remove the seal (26).
Lubricate the new seal (26) and place it in its housing.
CAUTION : When reassembling, carefully insert the air valve (24) into the gun body
carrying out a rotary motion so as to preformate the valve seal (26).
