SAMES KREMLIN
- 1 -
N° : 578.229.110-UK-1912
CAUTION :
Before any intervention, shut off the compressed air supply and depressurize the
circuits by triggering the gun. controlling the opening of the gun.
The gun is manufactured under the ATEX agreement and can not be modified.
SAMES KREMLIN will not be held responsible for any failure to comply with that
instruction.
Before removing a component of the gun, some precautions have to be taken :
-
Shut off the fluid pressure,
-
Empty out the paint inside the cup or the receiver and clean it,
-
Fill the cup or the receiver with cleaning solvent,
-
Take off the gun spraying air cap,
-
Shut off the gun supply air pressure,
-
Adjust fluid pressure to 0.5 bar / 7.25 psi and let the solvent circulate,
-
Shut off the fluid pressure,
-
Remove the part to be cleaned or changed.
Before reassemblying the different components, some precautions must be taken :
-
Clean all the parts with the appropriate cleaning solvent and a brush.
-
Install new seals if it is necessary after having lubricated them with PTFE grease.
-
Install new parts if it is necessary.
