SAMES KREMLIN
- 3 -
N° : 578.229.110-UK-1912
PROJECTOR (IND. 1 + 7 + 11) & VORTEX (IND. 18) REPLACEMENT
Unscrew the aircap assembly (1),
then remove the aircap ring (2), the aircap only (4), the stop ring
(5) and the ring seal (6).
Trigger the gun (36) then unscrew the nozzle assembly (7) with the wrench provided with the gun.
Remove the distribution ring (8) and the nozzle seal (10).
Remove the vortex (18) and the distribution ring (19).
Unscrew the needle stop (22), then remove the needle spring (20) and the needle (11) by the rear
part of the gun.
Check parts’ conditions. Change them if necessary.
Lubricate the needle (11) and the needle spring (20) with grease.
Reinstall them as well as the needle stop (22).
Reinstall the distribution ring (19) and the vortex (18).
Reinstall the new nozzle assembly (7) - screwing torque : 18 Nm / 13.276 Ft/Lbs.
Reinstall the new aircap assembly (1).
NOTA : the gun can operate without vortex (18) if necessary.
