SAMES KREMLIN 01D140, Руководство пользователя

Страница: 18 / 61

Env ironment
26/05/2020 582115110-EN-indC-Pump-01D140-01D140E.docx
18
2 Environment
The equipment must be installed on a horizontal, stable and flat
ground (e.g. concrete slab).
Non-moving equipment must be fixed to the ground by suitable
fasteners (spit, screws, bolts, ...) to ensure their stability during use.
To avoid risks due to static electricity, the equipment and its
components must be grounded.

For pumping equipment (pumps, elevators, chassis, etc.), a
2.5 mm section wire is attached to the equipment. Use this
wire to connect the equipment to the general "earth". In
severe environments (mechanical protection of the ground
wire, vibrations, moving equipment, etc.) where damage to
the grounding function is likely, the user will have to replace
the wire of 2, 5 mm supplied, by a device more adapted to
its environment (wire of greater section, braid of mass, fixing
by lug with eyelet ...).

Have the earth continuity checked by a qualified
electrician. If earth continuity is not assured, check terminal,
wire and grounding point. Never operate the equipment
without solving this problem.

The gun must be "grounded" through the air hose or fluid
hose. In the case of spraying with a pistol equipped with a
bucket, the air hose must be conductive.

The materials to be painted must also be "grounded" by
means of clamps with cables or, if they are suspended, by
means of hooks which must remain permanently clean.
Note: all objects in the work area must also be
grounded.