SAME SOLARIS 35, Использование и обслуживание

Страница: 20 / 288

SECTION I SAFETY/DECALS/SYMBOL
XX
–
ALWAYS travel at a speed that allows full control and stability of the
tractor. Avoid working near embankments and ditches. Reduce speed
when turning or driving on steep gradients, and when travelling over
ground that is loose, slippy or covered in mud.
–
DO NOT travel on the road or at high speed with the differential lock
engaged, as this could cause steering problems and thus lead to acci-
dents.
–
Before starting the tractor or PTO driven implements, ALWAYS check
that no-one is within the tractor/implement operating area.
–
Only attach to the 3-point linkage those implements specifically de-
signed for the purpose. Do not use the 3-point linkage as a towing
hook. For towing, use the rear towing hitch only (the front hook is for
use in emergencies only).
–
ALWAYS check that the weight of the towed vehicle or trailer is less
than the weight of the tractor (unless equipped with independent brak-
ing). Braking distance will increase with speed and the weight towed,
particularly on downhill slopes.
–
Lock the oscillating towing hitch in a fixed position and use the safety
locks when travelling on the public highway. Display load warning
signs when necessary and in accordance with the applicable regula-
tions. It is the responsibility of the operator to know and comply with
the requirements of the highway code.
–
Use emergency lights when travelling on the public highway, both in
daytime and at night.Use direction indicators before any turning ma-
noeuvre.Ensure that all the lights on the tractor are kept clean.
–
Use the bolt provided to lock the two brake pedals together when trav-
elling on the road. This is to ensure more uniform and more effective
braking.
–
All machinery driven by the PTO is a potential cause of serious and
even fatal injury. Ensure that the PTO and drive shaft guards are al-
ways in place. Before starting any work in the vicinity of the PTO shaft,
and before servicing/cleaning PTO-driven implements, put the PTO
control in the disengaged position, stop the tractor engine and wait un-
til all the moving parts of the implement have come to a complete
standstill.