SAME SOLARIS 35, Использование и обслуживание

Страница: 155 / 288

SECTION IV WHEELS
SECTION 4 - Wheels
Track adjustment
Tracks are adjusted to match the tractor to different row spacings and
implements, e.g. ploughs.
Tractors are delivered with disc wheels – track-adjusting wheels.
Depending on the size of the tires, you can choose among up to eight
different track widths.
Check the steering angle whenever the wheel track is modified.
Furthermore, bear in mind the international ruling providing that the
distance between the outer edge of the illuminated face of direction
indicators, position lights, tail lights and top rear reflectors and the outer
edge of the tires should not exceed 400 mm (15.76 in).
Any maximum track widths which may be specified in the vehicle
registration papers for the travelling on public lanes and roads must not be
exceeded.
After any adjustment to the track width and whenever changing the wheels,
tighten the nuts and bolts to the following required tightening torques:
- Front wheels bolts M14x1,5 = 17 kgm (169 Nm) (124,7 lbf ft);
- Rear wheels bolts M14x1,5 = 17 kgm (169 Nm) (124,7 lbf ft);
After 20 hours of work, all the nuts and bolts fixing the front and rear
wheels have to be retightened to the previous torques.
Before changing the wheels, ensure that the tractor cannot move and use
suitable supports.
Seating the tyre on the rim using compressed air: ensure that the air line
extension between the valve and the person inflating the tyre is of
sufficient length to allow the person to stand by the side of the tyre rather
than in front of it. This operation should be carried out by specially trained
personnel only.
91
CAUTION: BEFORE CARRYING OUT ANY OPERATIONS, READ THE
INSTRUCTIONS IN THIS MANUAL. FOLLOW THE INSTRUCTIONS
CAREFULLY DURING OPERATION OF THE TRACTOR.
CAUTION: CAREFULLY READ ALL SAFETY INSTRUCTIONS CON-
TAINED IN THE OPERATING AND MAINTENANCE HANDBOOK AND
FOLLOW THE INSTRUCTIONS LISTED ON THE TRACTOR’S DE-
CALS.