SAME SOLARIS 35, Использование и обслуживание

Страница: 144 / 288

SECTION III USE
Ventilation
The ventilation unit is housed in the cab ceiling.
To switch it on and adjust it, turn the electrical fan switch to the desired
speed.
When the ventilation system is on, a slight pressurization is created inside
the cab. This forces the air flowing into the cab to pass through the filter
placed behind the front grille.
The fan switch can be operated only after the ignition key is inserted.
The air flow can be regulated and directed by suitably positioning the air
diffusers.
The air can be taken from the outside or alternatively from the inside of the
cab depending on the position of the air recirculating grille.
Fully closed air recirculating grille: the air is taken from the outside only
by way of the front grille and filtered through a paper filter placed under the
grating itself.
Either fully or partially open air recirculating grille: now the air is
recirculated inside the cab.
N.B. - It is very important that the air diffusers never be completely closed
so as to allow for a steady air flow.
To obtain a greater pressurization inside the cab, it is necessary to take the
air from the outside, therefore the inside air recirculating grille should be
fully closed.
Controls
Ventilation control
0 - Electrical fan off.
1 - Electrical fan on first speed.
2 - Electrical fan on second speed
3 - Electrical fan on third speed
Heating control potentiometer
By turning it clockwise along the red sector after the system
is switched on, a progressive power increase of the heating
unit is obtained.
Air conditioning control
Rotating the knob clockwise, the interior of the cab will
gradually become cooler
80