Doc.-ID: 200917-PT08BA-ES-ExCam IPP1275_en_rev.00.docx, Page 8 of 28
3
Safety Instructions
Please absolutely observe the
installation instruction’s
safety directions of the T08 ExCam series!
Quick link:
It is absolutely mandatory to adhere to the national safety regulations and regula-
tions for prevention of accidents, as well as to the safety instructions given below
in this User Manual!
Attention!
Cameras of type T08 ExCam are not suitable for use in zones 0 and 20.
The ambient temperature, temperature class and explosion group writ-
ten on the enclosure nameplate must be absolutely adhered to! The
customer is not allowed to make any alterations of the camera! The
camera must be operated in a proper and sound condition and only in
the way intended.
Attention!
Repairs may only be carried out by using original parts from the man-
ufacturer. Repairs which affect the explosion protection may only be
carried out in accordance with the nationally applied regulations and
exclusively by the manufacturer.
Attention!
Prior to installation, take external sources of heat or cold into account!
The temperature ranges prescribed for storage, transport and operat-
ing must be adhered to!
Attention!
Adhere to the warnings given on the nameplate:
“WARNING – DO NOT OPEN IN HAZARD AREAS“
“WARNING – DO NOT OPEN WHILE ENERGIZED“
Using the camera in explosion-protected areas with regard to tempera-
ture and dust layers is defined in the respective national regulations.
When installing the ExCam, adhere to the requirements of the EN/IEC
60079-14.
