Doc.-ID: 200917-PT08BA-ES-ExCam IPP1275_en_rev.00.docx, Page 15 of 28
In order to connect the cable inside the ExConnection Rail to the insulation displacement
termination, please observe the instructions given in the video tutorial as well as the Ex
installation manual T04.
Video Tutorial:
“SAMCON 06 Wiring the cable in the ex-d housing”
Figure 5-6 Video Tutorial
Via the system cable the digital video stream is transferred via IP/ TCP/ RTSP protocol
levels and the camera module is controlled and/or parametrized via the web interface or
the video management software.
The power supply of the PoE camera is also conducted via this cable. The interface of
the ExCam IPP1275 uses a 10
0 Mbit/s „Fast Ethernet“ connection for the data transfer
(100BASE-TX).
Please observe the mounting instruction of the BTR-modul:
https://www.samcon.eu/fileadmin/documents/de/80-
Anzeigen%26Bedienen/Montageanleitung-BTR-Modul.pdf
Figure 5-7 BTR-Modul
