Operator’s manual
Rotary rake
Z-300; Z-300 Slim; Z-301; Z-301 Slim;
Z-350; Z-350 Slim; Z-351; Z-351 Slim;
Z-410; Z-440; Z-470
- 26 -
7.2.
Joints
Every 50 hours of rake’s operation, make sure to lubricate bearing beds (
Fig. 30a
), points
D
and
E
of the gear (
Fig. 30b
) and trolley (
Fig. 31
) with grease
ŁT43
(or other lubricant designed for
lubricating rolling and sliding bearings, which are exposed to operating in temperatures between -
30°C and +130°C).
Fig. 30.
Lubricating points of a) bearing and b) gear
Fig. 31.
Lubricating points of trolley
Every 50 hours of rake’s operation, make sure to lubricate joint (
Fig. 32
) with STP lubricant.
Fig. 32.
Lubricating point of ball joint
7.3. Risks present when lubricating
If risk of splashing is present, make sure to wear protective eyewear with side guards.
When lubricating protect eyes and skin against contact with the substance. Therefore use
adequate protective wear with long sleeves and protective footwear. Also use protective gloves.
In case of a contact with skin, immediately wash the infected area with plenty of soap water.
Do not allow the product to contaminate water outlets, water courses and soils.
In case of an unintentional release to the environment plug the leak, limit the spillage, and then
collect the oil with non-flammable absorbent material (e.g. sand).
The product is flammable. In case of fire, use adequate fire-extinguishing means (e.g. foam,
water mist, extinguishing powders). Do not use water jets.
Disposal of the used product must be made according to official regulations. Improper disposal
of the used oil poses danger to the environment.
a
E
D
b