Operator's manual
Circular saw -
PT
- 10 -
Risk of irritation to the respiratory tract
Lesser threat when cutting is also a dusty atmosphere as emission of significant fractions of
fine chips and dust. The operator thus should operate in a tight cabin with proper airflow.
Risk of irritation of skin and eyes
When connecting/disconnecting hydraulic hoses to and from tractor's hydraulic connectors
make sure that both tractor's and circular saw's hydraulics are pressure free, otherwise leak of oil
under pressure of approx. 16 MPa may occur. It also applies to damaged hoses. Therefore, when
operating hydraulic assembly, always wear protective gloves and eyewear. Inspect hydraulic hoses
regularly.
4.4.
Prohibited actions
Bear in mind the following prohibited actions when operating the saw:
DO NOT clean impurities, make any adjustments or repairs when the saw is in motion.
Never change the sequence of operation and maintenance works specified herein.
Never use the circular saw, if it is not good operating condition.
Never get near the circular saw’s working parts, which are in motion.
When performing the circular saw repair and maintenance works always comply with the
descriptions included in the operator's manual, while conducting them with the tractor's drive
disconnected.
Prior to approaching any works, focus your attention solely on the tasks to do.
Never operate the circular saw when being under influence of alcohol, drugs or medicines
which impair motor skills.
The circular saw cannot be operated by unauthorized and unskilled personnel.
Keep attention whether there are no unauthorized personnel or animals around the circular saw.
It is forbidden to cut tree branches and bushes, if the cutting plane goes through the tractor's
cabin.
4.5.
Residual risk assessment
Keep the following recommendations:
1.
read operator’s manual thoroughly,
2.
make sure no person remains on the machine when operating and driving,
3.
make sure no person remains within the machine’s operating range,
4.
before any adjustment, maintenance and lubrication works on the machine, make sure its engine
is turned off,
5.
repair works on the machine can be done by properly qualified and skilled personnel only,
6.
before operating the machine, carefully read the operator’s manual,
7.
make sure that no children and unauthorized personnel stays around the machine,
4.6.
Transport and delivery
Both carrier and driver are responsible for machine transportation. All equipment and parts
must be secured for transport. In order to move the machine onto any other means of transport
follow the below rules.
When hoisting grab the points indicated for this purpose on the machine and labeled with a
hook symbol (
Fig. 4
) only,
