Operator's manual
Circular saw -
PT
- 12 -
Tab. 2.
Location of center of gravity
Dimension [mm]
Type
PT3 – 190 (F)
PT4 – 250 (F)
A
170
180
B
410
430
C
900
1150
NOTE:
Protecting the maneuver area and providing safety for operation performed is responsibility
of the person in charge of the machine moving.
4.7.
Safety labels and their meaning
IMPORTANT:
a)
All warning labels should be clean and legible,
b)
Lost or damaged labels must be replaced,
c)
New labels can be ordered at the Manufacturer.
N-02
Caution: Cutting parts
N-03
Read the operator’s
manual before use
N-04
Before any service or
repair disconnect the
power supply
N-06
Warning: pulling-in
parts
N-07
Do not operate the if any
personnel remains within
170 ft (50m) from the
machine
N-40
Transport holder for
machine handling
N-50
Do not remain in the
machine swinging area
N-168
Do not touch the
machine before the
rotating parts have not
come to a complete stop
N-204
N-206
N-219
Wear protective shoes
Wear protective gloves
This applies to a Fisher-compatible circular saw
(motor with absorbing capacity of 26cm
3
– without
oil separation pipe)
