Operator's manual
Circular saw -
PT
- 18 -
8.
MAINTENANCE AND STORING
Upon dismounting the circular saw from the extension arm, if the idle period for the circular
saw is longer than one month, perform the following maintenance works:
Clean the circular saw thoroughly from any dirt and then wash and dry it.
Should the circular saw require any repairs, adjustments and supplementations, or grease, seal
replacements, perform them.
Remove any sources of corrosion and complement any paintwork defect.
Protect metal surfaces with thin layer of solid grease, e.g. ŁT – 43, or mineral engine or
gearbox oil, e.g. 15W40.
The circular saw should be stored under roof and in manner which effectively prevents animals
and people from being injured.
9.
DISASSEMBLY AND WITHDRAWAL FROM USE
In case of partial wearing of the circular saw, replace any worn parts. Prior to this, clean the
machine from dirt and chips. Then dismount circular blades. Next replace all worn parts with new
and assemble the circular saw using brand new couplings. Bolts should be tightened with torque
corresponding to their strength classes. Adjust tension of v-belts and pulleys so that they are
aligned.
Pay particular attention at any assembly and disassembly works and use drawings provided in
spare part catalogue.
Store damaged or worn parts in restricted area and then deliver to a scrap yard.
NOTE:
When mounting and dismounting, please remember to use personal protection as well as
environmental protection means.
WARNING!
When dismounting the machine pay particular attention to additional
dangers, as crushing, cutting, wounding, concussion and abrasion. Use
proper tools and personal protection measures: protective gloves, clothes and
footwear, eye protection, etc. Pay attention not to allow the machine lose its
stability and therefore protect it with supports.
If the circular saw cannot be repaired anymore, it should be withdrawn from use. Prior to this,
clean the machine from dirt and chips. Dismount circular blades firstly. Then disassemble the whole
circular saw and remember to segregate parts according to kind of material used and deliver them to a
scrap yard.
