Operator’s manual
Rotary tedder P4 – 471 and P4 – 531
Rotary tedder P6 – 651 and P6 – 771
- 27 -
8.
MALFUNCTION AND THEIR REPAIRS
9.
DISASSEMBLY AND WITHDRAWAL FROM USE
9.1. Scrapping
If the tedder cannot be repaired anymore, it should be withdrawn from use
.
To do so, oil from intersecting axis gear should be drained and delivered to a proper waste
treatment company. Clean the tedder parts, dismantle and dispose properly of all plastic parts. After
that, the tedder can be scrapped.
10.
WARRANTY CARD
ROTARY TEDDER
The product quality has been checked and meets the required standards and regulations and is
permitted for use.
NOTE:
A warranty card without the required information or with corrected or illegible
information –
is invalid.
Defect
Reason
Repair
The tedder will not lift/lower
by means of hydraulic
assembly
Damaged or soiled
components of hydraulic
assembly
Replace or clean fittings of
the hydraulic assembly
Damaged tractor’s hydraulic
assembly
Check condition tractor’s
hydraulic assembly
Cylinder not tight
Contaminated oil in tractor’s
hydraulic assembly
Replace oil in tractor’s
hydraulic assembly
(recommended oil purity
class according to NAS 1638
is minimum 9-10). Order
repair kit of the cylinder and
replace damaged seals
Excesive vibration while
operating
Damaged PTO shaft
Check the condition of PTO
shaft and if need be replace
Oil leak in gear
Assembly not tight
Examine tightness and check
oil level.
Unevenly worn hitch locking
pin
Improperly set tedder’s hitch
on tractor’s links
Set the hitch, so the pin is in
line with the lock’s axis
Serial number
Date of manufacture
Manufacturer’s stamp
QC signature
Date of purchase
Dealer’s stamp
Dealer’s signature
