Operator’s manual
Rotary tedder P4 – 471 and P4 – 531
Rotary tedder P6 – 651 and P6 – 771
- 17 -
Fig. 13.
The tedder transport width change
WARNING:
Transport width of tedder P6 – 771 may exceed
13' 2"
as main wheels of the
tedder are lifted above
4"
from the ground.
5.5. Mounting PTO shaft
Prior to commencing operation, examine and adjust length of PTO shaft, which is designed to
mount machine on tractor. In some cases it is possible, that the shaft is too long and therefore needs
to be shortened, so that there is adequate tolerance for the shortest possible distance between
tractor’s shaft and machine’s shaft.
PTO shaft’s end with friction clutch should be mounted on tedder’s side.
When connecting PTO shaft between tractor and tedder make sure, that external guard tube of
the shaft is on the tractor’s side. The PTO shaft plastic guards have to be secured by fastening their
small chains to immovable parts of tractor and tedder.
1
Transport width Lt<
9' 10"
T
T
Transport width of more than
9' 10"
Transport width of less than
9' 10"
