SaMASZ KDDR 861 Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 51

SaMASZ KDDR 861 Скачать руководство пользователя страница 46

Operator’s manual

Double-sided mower with central

suspension

“REWERS”

- 44 -

9.

DISASSEMBLY AND WITHDRAWAL FROM USE

9.1.

Disassembly

Before any repair or service works clean the mower thoroughly and remove any grass, dirt or

mud.

Carefully check nuts and bolts for adequate torque and pins for wear. Replace screws, pegs,

pins, bushings, disks, holders, knives, knife mountings, bearings etc., if necessary.

Once the machine is repaired perform the following:



Make sure that all elements are installed properly,



Install the removed guards,



Check that all screws and nuts are tightened,



Check for proper clearance on pins and gears,



Once all the guards are installed, perform a warm-up start to make sure the repaired machine
operates properly.

CAUTION:

Before any repair works disconnect the machine from the tractor.

9.2.

Disassembly and withdrawal from use

If the mower cannot be repaired anymore, it should be withdrawn from use

.

For this purpose oil from intersecting axis gear and cutterbar should be drained and delivered

to a proper waste treatment company. Clean the mower parts, dismantle and dispose properly of all
plastic parts. After that, the mower could be sold to breaker’s yard.

CAUTION:

When  disassembling  the  machine  pay  particular  attention  to  additional
dangers  as  crushing,  cutting,  wounding,  concussion.  Use  proper  tools  and
personal  protective  equipment:  protective  gloves,  clothing  and  shoes,
goggles,  etc.  Pay  attention  so  that  the  machine  works  efficiently,  and
therefore it is required to secure the machine with supports

.

«
...
44
45
46
47
48
...
»

Содержание KDDR 861




















































Отзывы:

Нет отзывов