SaMASZ KDDR 861 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 51

SaMASZ KDDR 861 Скачать руководство пользователя страница 16

Operator’s manual

Double-sided mower with central

suspension

“REWERS”

- 14 -



In order to operate safely use only fully technically fit, undamaged PTO shafts. Damaged PTO
shaft shall be repaired or replaced with new one.

4.7.

Hydraulic assembly



Caution! Hydraulic assembly is under pressure! Hydraulic oil under pressure may permeate
through skin and cause serious injury, therefore skin and eyes should be protected in particular.
In case of injuries caused by a liquid under pressure, call a doctor immediately.



Hydraulic hoses can be connected to tractor's hydraulics, provided that both the tractor’s and
the mower's hydraulic assemblies are not under pressure. To remove the pressure from the
hoses just simply restart the tractor's hydraulic valves several times, once the tractor is off.



When dismounting the machine from the tractor, set the equipment aside, deflate the pressure
from hydraulics and turn tractor's engine off.



When controlling for hydraulic assembly's malfunction and looking for oil leaks, it is forbidden
to touch any potential leaks until the entire assembly is under pressure.



Note! It is recommended to use hydraulic oil featuring oil purity class 9 - 10 in accordance
with NAS 1638.

When using hydraulic hoses:



Avoid stretching the hoses when operating.



Do not allow hydraulic hoses to get deflected.



Do not expose hydraulic hoses to contact with any sharp edges.



If damaged or worn, replace the hoses with new ones.



Useful life for hydraulic hoses is 5 years from their production date.

4.8.

Tarpaulin guards

Due to their storing, SaMASZ manufactured mowers feature standard tarpaulin guards (

1

) for

self-mounting. In order to mount the guard properly put it on a mower and secure with catches (

2

)

and with front guard (

3

)

Fig. 11

. Examine condition of guards and its mounting on regular basis.

Front guard (

3

) should be fixed so that it holds the safety curtain (

1

).

Fig. 11.

Mounting tarpaulin guard on mower

4.9.

Residual risk

Despite the fact, that company SaMASZ Białystok – the manufacturer of that mower takes

responsibility for design and manufacturing of the mower, in order to eliminate dangerous
situations, certain risk during mower operation is unavoidable.

Major source of risk follows performance of these operations:



operation of mower by minors as well as not being familiarized with operator's manual,



operation of mower by persons under influence of alcohol or other abusive substances,



not keeping caution while transportation and shifting of mower during operation,



transport of persons remaining on the machine,



presence of persons and animals within the mower operation range,



performing operations related to servicing and adjustment with engine on.

2

1

3

«
...
14
15
16
17
18
...
»

Содержание KDDR 861




















































Отзывы:

Нет отзывов