Operator’s manual
Double-sided mower with central
suspension
“REWERS”
- 31 -
Fig. 27.
Shape of the stubble with cutterbar’s inclination 0°, 3° and 5°
5.8.2. Mower clogging
When operating the mower pay attention to variable conditions on field, which may influence
the mower clogging, such as: terrain unevenness, height and density of grass as well as other
objects in the grass. In order to avoid clogging, mowing speed should be adjusted to the mentioned
conditions. In order to take care of machine blockage, lower the cutting unit onto the ground, turn
off the drive and the motor, remove the ignition key, and pay particular attention, and remove the
collected material using a sharp tool. Once a blockage is removed, check whether there are no
damages to working elements.
5.8.3. Taking turns over swaths
When operating headlands, lift cutterbars on mowers by means of the tractor's hydraulics
(hose
2
and
3
–
Fig. 19
). The set will lift in sequence, with KDF bar first, and then KDD bars.
In mowers fitted with controller, lift cutting units using button (
9
)
on control panel (
Fig.
21
) while controlling the tractor's hydraulics, and then take a turn.
5.10.
Detaching the mower from the tractor
CAUTION:
While detaching, make sure there is no person in between the mower and the
tractor.
To detach the mower from the tractor do the following
:
Turn off the cutterbar drive, tractor's ignition and take the tractor's ignition key out,
reduce pressure in the tractor's hydraulics,