SaMASZ IMPACT 300 H, Руководство оператора, Страница: 17 / 24

17
O PERATOR’S MANUAL SILAGE ROLLER IMPACT
❑
In the case of repairing the paintwork, attention must be paid to the integrity and legability of all
information and product labels. If necessary, these must be replaced by original spare parts from
SaMASZ.
❑
The tightness of all fastners (bolts and nuts) must be checked regularly, and tightened
as needed.
WARNING:
Never perform different tasks, simultaneously, with more than one person.
WARNING:
Non-compliance with the maintenance information can lead to serious accidents
and user impairments.
WARNING:
Do not have any body parts or tools positioned under the silage roller.
IMPORTANT:
Failure to comply with the lubrication service can lead to property damage and
impairment of use.
6.1. Lubrication and maintenance plan
6.1.1. Lubrication
Before each use, the operator must carry out a visual inspection and perform the lubrication
services due in each case.
Lubricate all lubrication points with an environmentally friendly multi-grade grease according to
the following lubrication schedule.
Lubrication Schedule Lubricant Frequency
Blank surfaces on the roller body
Environmentally friendly
multi-grade grease
Before storage
Grease nipple as indicated on the
machine.
Every 20 hours of
operation
6.2. Maintenance work
Verify all fasteners (bolts and nuts) are after the first hour, then 5 hours of operation.
Afterwards, all connections must be checked for tightness every 20 operating hours and
tightened if necessary.
6.3. Cleaning plan
Clean the machine after each use. Careful treatment protects the machine from damage and
prolongs it’s useful life.
If you are unable to remove the dirt and debris, use a high pressure water jet to clean the surface.
Avoid using any harmful detergents or solvents.
IMPORTANT:
Never direct a high pressure water jet at the seals and bearings. This can result
in expensive repair work.