Operating manual
Tedder wagons OptiFEED
11
Counter blades always have to be set in desirable position by using a bolt (
Fig. 3
). The bolt
has to be always secured by a pin shaped in a letter R.
WARNING!
NEVER REGULATE COUNTERBLADES WHILE THE MACHINE
IS STILL WORKING.
DO NOT REMOVE THE COUNTERBLADES.
Fig. 3.
Counter-knife locking
6.2.
AUGER
There are blades on the auger, each of them mounted by three screws. The base in the lower
part of the blade is used to strengthen it.
The machine achieves high mixing standards thanks to the better use of volume and
optimized flow of materials. Thanks to the cone-like shape, silage bales land in deeper. There they
are being cut by larger amount of blades and are quickly shredded. Optimized auger’s shape
supports mixing in two directions – vertical and horizontal. Thanks to the auger’s cone-like shape, it
is possible to get homogeneous blends, even in small amounts of fodder. On top of that, unloading
of the machine and even distribution of fodder is guaranteed. Additional gathering arm supports this
process.
Fig. 4.
View of augers
