Sam4s SPS-2000, Руководство по программированию

Страница: 49 / 195

SPS-2000 Program Manual v1.30 S Mode Programming

49
(16) PROJECTIONS
The Product Projection report provides a history of each product mix item's sales by day of week.
(17) # OF RECIPE
Recipes can be used for stock control. When a product is sold; the information will be automatically
calculated back through the recipe file in order to deduct the stock from the relevant ingredients. This is
the maximum recipes available
(18) # OF INVENTORY INGREDIENT
Enter the maximum number of inventory ingredients you wish to use if you are implementing an
ingredient inventory system.
(19) # OF LINES FOR ELECTRONIC JOURNAL
This is the maximum number of lines available for the journal storage area before a reset report is
required. One line is required for each line of normal print. Wrap round reporting can be activated with
line-by-line override of the oldest data.
Note: Receipt Reprint (available at version 2.00s) requires that the transaction to be retrieved be resident
in the electronic journal. Be sure to allocate electronic journal if you wish to use the receipt reprint
options.
(20) # OF PAID RECALL TRANSACTIONS
Enter the number of preceding transactions (a maximum of 99) that may be viewed by repeatedly pressing
the
PAID RECALL key.
(21) CLERK INTERRUPT
This enables the suspension of an active sales transaction, enabling more than one operator to use the
ECR at a time.
(22) EAT-IN BY TIME PERIODS
This allows analysis eat-in sales by time period.
(23) TAKE OUT BY TIME PERIODS
This allows analysis eat-in sales by time period.
(24) DRIVE THRU BY TIME PERIODS
This allows analysis eat-in sales by time period.
(25-28) TRACK 1 – 4 BY TIME PERIODS
This provides analysis of the closed/paid check tracking totals with the total monies received reported per
hour.
(29) REPORT SELECTION TABLE
Z2 represents accumulation of Z1 reports; Z3 represents accumulation of Z2 reports, etc. You must select
all levels below your highest selected report level. For example, if you select Z4 reporting for a particular
report, then you must also select Z1, Z2, and Z3 for that report. Each of the five report areas can be read
and reset independently.
(30) # OF PROMOTION TABLE
This option represents the promotion (mix & match, fixed price, or multi buy) tables that will be
available.