Sam4s SPS-2000, Руководство по программированию

Страница: 145 / 195

SPS-2000 Program Manual v1.30 P Mode Programming

145
Messages
Various descriptors and messages are set with this program:
Message Type of Message and Application
Logo Message
6-line x 40 character Preamble & Postamble. Appears on receipts
Error Messages
30-characters per message. Displays on message line of screen. Default
messages are listed below.
System Descriptors
The length of each descriptor varies. For example day of week fields are
3 characters, while other printed messages are 5 characters or more.
Default System Descriptors are listed below.
Report Descriptors
16-character descriptors for Financial and Employee report totals.
Check Endorsement
Message
10-line x 40 characters. Prints when check is endorsed on an optional
slip printer.
Guest Check Logo Message
5-line x 40 character Preamble & Postamble. Prints at top and bottom of
hard or soft checks
Validation Message
3-line x 40 character. Prints when forms are validated on an optional slip
printer.
DataTran Message
4-line x 32 character. Prints on electronic payment voucher/receipt.
Pole Display Message
A 25-character message can scroll left, right, or bounce left to right on an
optional pole display.
Default Error Messages
NO. DESCRIPTION
1 (NOT USE)
2 (NOT USE)
3 AMOUNT REQUIRED
4 BAD VALUE
5 BUFFER FULL
6 BUFFER EMPTY
7 BUSY
8 BAD
COMMAND
9 CASH DECALATION REQUIRED
10 CASH-IN-DRAWER EXCEEDED
11 CHECK# ASSIGNED AUTO
12 CHECK# REQUIRED !
13 CONDIMENT REQUIRED !
14 CRC ERROR
15 TABLE NUMBER IN USE
16 ANALYSIS 1/2/3
17 ENTER EMPLOYEE CODE
18 ENTER EMPLOYEE #
19 ENTER GUEST COUNT
20 ENTER SEAT#
21 ENTER TABLE#
NO. DESCRIPTION
22 ENTRY REQUIRED
23 ERROR
24 ERROR
JAM
25 GALLON AMOUNT REQUIRED
26 HALO OVER!
27 ILLEGAL KEY SEQUENCE
28 IN USE!
29 INACTIVE!
30 INPUT
QTY
31 KITCHEN PRINTER FAILURE
32 MANAGER REQUIRED
33 MANAGER OVERRIDE REQUIRE
34 MEMORY FULL
35 NEGATIVE
36 NO
CHECK#
37 NO DATA
38 NO DRAWER!
39 NO MANUAL ENTRY
40 NO PAPER
41 NO PLU!
42 NON ADD# REQUIRED