Sam4s SPS-2000, Руководство по программированию

Страница: 45 / 195

SPS-2000 Program Manual v1.30 S Mode Programming

45
NETWORK PING TEST (v3.00y Feb. 27, 2009 or later)
This will test a specified network IP address.
AGING TEST
APPLICATION UPDATE
Touch APPLICATION UPDATE to initiate an update of the application program by SD card. The
update application file SPS2000 must reside in the SPS2000 folder on the card. See Application Upgrade
from SD/USB Card” on page 32 for details
Memory Clearing
The Memory Clear selection allows you to selectively clear various areas of the SPS-2000 memory.
► Touch MEMORY CLEAR from the S MODE MAIN MENU to display the S mode MEMORY CLEAR
Screen.
Memory Clear Options
(1) RESET ALL TTLS, CNTS & GRAND TTLS
This will remove any sales from the reporting memory, clearing all totals, including grand totals.
(2) CLEAR TOTALS AND COUNTERS
This will clear all sales totals from the reporting memory, excluding grand totals.
(3) CLEAR GRAND TOTALS ONLY
This will clear grand totals only, excluding all other sales totals.
(4-7) CLEAR ORDER TRACKING 1 - 4
This will clear the open checks, setting the balance to zero. The PLU sales are still retained for that check
on the financial and product reports. This must be done on the ECR set by S-mode options.
(8) CLEAR PAID RECALL
This is reset the memory for displaying paid transactions, the information will begin storing again.
(9) CLEAR PRODUCT PROJECTIONS
This will reset any information held in the product mix, sales projection files, which store the product
usage, period projection analysis.
(10) CLEAR TIME-KEEPING
This will reset employee time clock information, remove all hours worked totalizers and labor costing.
(11) CLEAR CLERK INTERRUPT
This will remove any sales currently open against an employee.
(12) CLEAR PRE-POLL STATUS FLAG
If an unsuccessful attempt has been made to consolidate ECRs sales data, the report is flagged as failed.
This will remove that flag allowing normal reporting consolidation again.
(13) CLEAR PLU FILE