Sam4s SAP-630FT, Руководство пользователя

Страница: 260 / 271

258
•
Sam4POS 6600/4800II Program Manual v2.1
b.
The MACRO sequence would simply be the numeric #5 followed by the EFT
Operation function key:
[5]
[EFT OPERATION]
c.
The MACRO would then be assigned to a position on an MLU or FLU.
Datatran_Operation Definitions
From the main PROGRAM MODE menu, select DEVICES , then choose EFT OPERATION:
Operation Definition
Initialize EFT Use this function to initialize the Datacap EFT device.
Close Batch Closes the current batch and opens.
Void Sales By Record Number . . .
Use these operations to void transactions when the card is not
present.
CAUTION: These voids will not correct ECR totals (i.e.
PLU Sales) but will maintain a total on the Financial Report. (Not
. . . Void Return By Record Number
available with processor “First Data”)
Use the Void Mode function at the S
AM
4POS terminal to perform
transaction voids that will correct the appropriate sales totals.
Issue Local Transaction
If “terminal based” processing is used, the Local Transaction Report
contains details of each transaction in the current batch. When “host
based” processing is used, transaction data is stored at the processor.
Gratuity Entry
The Gratuity Entry command allows the operator to add a tip to a
pre-authorized credit sale.
(Not available with processor “First
Data”)
Post Authorization
If electronic authorization is not approved and the merchant receives
voice authorization, the transaction can be entered into the batch
with this operation.
Pin Pad Reset Used this function to initialize the Pin-Pad device.
Parameter Download Use this function to get new PIN Pad parameters from Datacap
Get Gift Card Balance
Select Gift Card Balance, the operator will be prompted to slide a gift
card. The balance will be printed on the receipt printer
Get EBT Balance Use to check the EBT food stamp balance
EMV Voucher For EBT Use to manually enter EBT transactions.
Test Mode Use only for certification testing.
Self-Initiated Load Used to load the Datacap EMV device parameters.
Diagnostics
Used to perform various diagnostics. Use as requested by Datacap
support.
Clear EMV File
This clears the internally stored token file that stores the Authorization
Response messages that allow the S
AM
4POS to perform “By Record
Number” transactions. Specifically, the Void Transaction by Record
Number and Gratuity Entry. Perform this operation Daily.