98
• Service Mode
SAM4S ER-230EJ Manual
Restore Program from the USB memory
CAUTION: Memory allocation must be set the same as the saved program. Be sure to
print out the memory allocation so that it can be re-entered before restoring the
program.
1.
Set the store name to match the name of the store folder you wish to restore.
2.
Insert the USB memory in the register’s USB port.
3.
Move to the
SERVICE MODE
.
4.
From the Service Mode menu, select “
7.PROGRAM BACKUP
”.
5.
From the
PROGRAM BACKUP
menu, select “
2.USB
”.
6.
From the USB menu select “
2.PGM RESTORE
”.
7.
The register will display confirmation of the successful restore with the message
“SUCCESS !”. If the save is unsuccessful, the register will print out an error
message.
Saving Reports to an USB memory
The USB memory can also be used to save reports. Reports saved are the current X1
readings.
USB Report Notes
1.
When backing up and restoring data, the store name must be programmed on
page
133
of “Store Name” in the See “SYSTEM” of "
Options Programming
".
The default store name is “STORE001”.
2.
The ER-230EJ will write the program files to folder. For example:
ER-230EJ /STORENAME/SALEBACK/REPBACK/DATE/TIME
The date folder depends on date format option. See “SYSTEM” of "
Options
Programming
" in the "
Program Mode
" chapter to set DATE FORMAT.
DATE FORMAT
DATE FOLDER NAME
YYMMDD
20150403
DDMMYY
03042015
MMDDYY
04032015
3.
Each individual report is named with the time of the report. For example
“CLK02332” represents a Clerk report taken at 23:32 (in a 24-hour time
format.) In this manner, multiple reports backed up at different times in the
same day will collect in the same “date” folder.
