Sam4s ER-180Series, Руководство по эксплуатации и программированию

Страница: 45 / 53

ER-180
·
41
Option settings 1
The register operation can be tailored using the following options. For each option set
there are five questions answered by entering 0 or 1.
The five choices a,b,c,d,e for each option must be answered at the same time. This
results in a five digit entry of
0’s and 1’s followed by the RA (+) key.
To Change Settings
•
Ensure the key is in the PGM position
•
On the number keys type in the answer for question
a
i.e. enter 0 for normal reports or 1 to force cash count entry before reports
•
On the number keys type in the answer for question
b
i.e. enter 0 to print all unused report totals or 1 to skip zero value lines
•
On the number keys type in the answer for question
c
i.e. enter 0 to print one financial report or 1 to print two copies
•
On the number keys type in the answer for question
d
i.e. enter 0 to print all corrections and Gross on reports or 1 to not print
•
On the number keys type in the answer for question
e
i.e. enter 0 not to print the subtotal key presses or 1 to print subtotal
Answer Question Explanation
a
*
0
1
None Compulsory Declaration
Compulsory Declaration
This programs the register to prevent the
printing of financial reports unless the
operator enters the actual monies taken
i.e. “Compulsory Declaration”
This then provides a comparison between
the actual and theoretical monies
b
0
*
1
Print items with 0 values
Do not print items with 0 values
This option sets if unused functions are
printed on reports with a zero or not
printed at all.
c
*
0
1
Print a single copy of the Z report
Automatically print two copies of
the Z report
It is possible to have a second copy of the
Z report printed automatically.
d
*
0
1
Print Returns / Voids and Gross
Total on reports
Do Not Print Returns/ Voids and
Gross Totals
This removes the refund / void and gross
totals from the printed financial reports.
e
0
*
1
Print Subtotal when key pressed
Do not print the Subtotal
This set is the Subtotal value is printed
when the key is pressed.
* indicates default setting
•
Press the RA key and return the key to the REG position
a
RA
(+)
b c d e