13
ZetrOZ, Inc.
Product Support
203-349-2798
Remove the
sam
Device components (Figure
1) from the packaging and inspect for any damage
that may have occurred during shipment. Charge
the device for up to 6 hours or until the Power
Controller Indicator LED is Green. The
sam
Device
arrives only partially charged due to generally
accepted shipping practices.
9.1. CHARGING THE POWER
CONTROLLER MODULE
A.
Plug the micro USB end of the
sam
Electrical Charger into the charging port on
the bottom of the
sam
Power Controller.
B.
Plug the electrical charger into a 120/230
VAC wall outlet. The
sam
Power Controller
Module indicator LED will be amber. When
the device is fully charged the top right
indicator LED will change from amber
to green.
10. Treatment Options
10.1. TREATMENT DURATION
The
sam
Ultrasonic Diathermy Device provides
ultrasound therapy at a preset frequency and
intensity. The user can program the treatment
duration to be 1, 2, 3, or 4 hours. The maximum
treatment duration setting on the
sam
Device
is 4 hours. Treatment duration should be set to
the minimum increment required for eff ective
therapy. Due to individual diff erences in skin type
and tolerance, it is recommended to begin with a
1 hour treatment. Increase treatment duration in
subsequent applications only as tolerated. Maximum
usage time is 4 hours per day per treatment area.
The
sam
Device may be used while charging.
Charging the device during treatment has no impact
on device frequency or intensity output settings. If
using
sam
while charging, position the device in
such a way that the charger cable is easily removed
from the power controller module if needed.
Bottom of sam Power Controller
Micro USB
Wall Charger
Outlet
fi gure 3B
fi gure 3A
9. Initial Setup Instructions
