Sam Cook 1197829, Руководство пользователя

Страница: 27 / 34

EN
26
att achment (butt erfl y whisk) and the cutt er
guard (mixing paddle).
INSTALLING/REMOVING THE BASKET
The appliance features a basket for cooking
rice, groats and other loose foods.
1. Fill the basket ⑮ with food products
intended for thermal processing.
2. Place the basket inside the jug ④ .
CAUTION! The basket can be used only when
there is no mixing att achment (butt erfl y whisk)
or cutt er guard (mixing paddle) in the jug.
CAUTION! Aft er inserti ng the basket, make
sure the food does not exceed the MAX level
indicated in the jug.
3. When cooking is fi nished, remove the
basket from the jug using the collapsible
basket handle.
CAUTION! Always wear kitchen mitt ens when
removing the basket from the jug.
INSTALLING/REMOVING
THE STEAMING CONTAINER
1. Install the jug ④ and the jug cover ⑧ into
the appliance. Do not put the measuring
cup ⑨ in the jug cover.
2. Place the steaming container ⑩ on the jug
cover ⑧ .
3. Place the tray ⑪ on the container ⑩ .
If the food you are going to cook does not
fi t under the tray, you can skip this step.
4. Place the container cover ⑫ on top.
5. To remove the container, follow these steps
in reverse order.
CAUTION! Always wear kitchen mitt ens while
using the steaming container.
PROGRAMME DESCRIPTION -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The appliance features 2 dedicated automati c programmes: mixing/kneading (Dough) and heati ng/cooking (Heati ng). See the table below for their
main parameters, features and applicati ons.
The appliance can also be used in the manual setti ng mode, which allows full editi ng of all parameters.
PROGRAMME
DEFAULT
SETTINGS
DEDICATED
ACCESSORIES
USAGE NOTES
Depending on your needs and type
of food you can modify each of the
programmes/mode in a wide range
(ti me: from 5 s to 90 minutes; tempera-
ture: from 30 to 120 °C; mixing speed:
from “0” to “12”).
The excepti on is the "Dough" program
in which you can set a maximum of 4
mixing speeds and a maximum of 4 min-
utes of program durati on.
The appliance has a safety mechanism
which locks the maximum mixing speed
at “4” if the temperature in the jug
exceeds 60 °C.
“Dough” ti me: 2 minutes
temp.: 30°C
mixing speed: “3”
mixing paddle,
cutt er guard,
kneading,
whisking
“Pulse” functi on disabled
maximum durati on of the
program - 4 minutes
selectable mixing speed - from
1 to 4
“Heati ng” ti me: 90 minutes
temp.: 37°C
mixing speed: “0”
basket, steaming
container,
cooking, steam
cooking, melti ng,
heati ng, frying
“Pulse” functi on disabled
EN
27
Manual setti ng
mode
N/A mixing, grinding,
chopping,
blending,
shredding
“Pulse” functi on acti ve only
before change temperature,
manual setti ng mode requires
declaring the mixing speed
(minimum 1 or higher)
WARNING! When kneading heavy masses,
yeast dough, do not exceed 4 minutes. An
excessively loaded device may overheat over
which will be signaled by error E1 or E4. In the
event of overheati ng, switch off the device
and allow it to cool completely before re-use.
WARNING! When choosing a high mixing
speed (from 8 to 12), the set mixing ti me
should not exceed 5 minutes.
USING THE APPLIANCE ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The descripti ons below present a general usage
patt ern only. For detailed descripti ons of specifi c
dishes, ingredients, proporti ons and weights,
refer to the cookbook.
MIXING AND COOKING
1. Install the cutt er assembly ⑦ in the jug ④ .
Depending on the food processing tech-
nology, you may also need to install cutt er
guard (mixing paddle) ⑬ or the mixing
att achment (butt erfl y whisk) ⑭ or the
basket ⑮ .
CAUTION! The blades are very sharp. Handle
with care.
2. Install the jug ④ in the jug slot ⑱ .
3. Insert the food you want to process into
the jug. Do not exceed the maximum vol-
ume indicated on the jug with the horizon-
tal line (the top line: max. 2000 ml). If you
are going to use the basket ⑮ , pour enough
water (broth, bouillon) into the jug that it
covers the food in the basket. The scale
functi on enables precision measuring of the
ingredients you add to the jug (see: “SCALE
FUNCTION”).
CAUTION! Do not fi ll the jug over its
maximum volume: 2000 ml (see the MAX
mark inside the jug). With liquids, do not go
over 1500 ml (see the mark inside the jug).
CAUTION! Take extra care while cooking
food. Do not start the appliance if the jug
is empty. Make sure there is enough water
in the jug while cooking food in the basket.
CAUTION! While putti ng and pouring ingre-
dients into the jug be careful not to spill them
over the base of the appliance. There is an
electrical shock hazard.
4. Install the jug cover ⑧ onto the jug ④ .
5. Install the measuring cup/cover cap ⑨
in the jug cover ⑧ .
6. Connect the appliance to the mains and
turn it on using the on switch ⑯ on the
right side of the appliance. The appliance
will turn down if you do not take any acti on
within 5 minutes. To turn it on again press
any butt on on the control panel.
CAUTION! Further operati on of the control
panel is possible only if the jug ④ and jug
cover ⑧ have been properly installed in the
appliance. Improper installati on of the jug or
jug cover will be indicated by displaying the
“E2” or “E3” error in the middle secti on of the
display
A3
.
7. Start the mixing/kneading (Dough) or
cooking (Heati ng) programme using the
butt on
2H
or
2I
. Programme start will be
indicated by the control light next to the
corresponding butt on and the light next to
the “Start/Stop” butt on
2G
. The left side of
the display
A1
shows the current tempera-
ture in the jug, and the right side
A2
shows
a ti mer counti ng down 2 minutes (for the