Salvo Primary Dive Lights, Инструкция по использованию и уходу

Страница: 12 / 14

10
• Connect the new bulb to the lead wires from the ballast.
• Reinstall the bulb into the socket. Twist the bulb with a ¼ turn
as you do so to help the wires back into the socket assembly.
• Holding the lamp cover with a glove or towel, reinstall the lamp
cover with a slight twisting motion.
• The first 2-rings do the sealing. The third O-ring at the bottom
is there to cushion the lamp cover and is not there to seal it.
• Do not to use grease on these O-rings. The grease will make the
O-rings to slick and pressure build up during reinstallation will
cause the lamp cover to push back off. It is best to replace the
O-rings if installing a new bulb.
• Never remove the lamp cover unnecessarily. Most bulbs and
lamp covers are not broken during a dive, but most commonly
during unnecessary assembly and disassembly.
Rebel 12 and Handheld 9
Then Rebel 12W LED and Handheld 9W LED primary lights are unique to other
lights because of the way they are charged and switch actuation. These unique features
were added to ensure the ultimate in a compact light ideal for today’s traveling diver.
Charging
•
Remove light head from tail piece.