Salvo Primary Dive Lights, Инструкция по использованию и уходу

Страница: 8 / 14

6
•
LED will glow red while charging and will turn green when the charge
cycle is completed.
•
It is recommended from the battery manufacturer to leave the Li-Pol
packs partially discharged (30-50% rated capacity) when storing.
Pre-Dive
To ensure years of dependable service from your light, follow the steps below during your
pre-dive setup.
• Is your battery charged?
• Inspect and make sure the cord and switch boot do not have
any cuts or damage
• Be certain that the lid sealing o-ring is in place. There is
really no reason to remove this o-ring during storage.
Periodically you should inspect the lid o-ring and wipe dry any
excess grease and sand, do not lubricate as it will attract dirt and
grit.
• Connect the lid assembly to the sealed battery. Be certain that
the banana plugs of the lid are lined up with the color indexed
sockets of the canister. Gently slide the lid down on the
canister until the o-ring makes contact with both the lid and
canister. If there is resistance,
STOP!! , and ensure that the
connectors are properly aligned. Never try to forcefully close
the canister.