Salvo Primary Dive Lights, Инструкция по использованию и уходу

Страница: 9 / 14

7
• When closing the locking latches, make sure to apply pressure
evenly and simultaneously to the latches.
• Turn on the light and make sure it comes on. It is best to leave
the light on for at least 30 seconds before turning off.
Although the Brightstar™ bulbs and ballasts are designed to be
hot re-strike able, “short-striking” the bulb can cause the life of
the bulb to be shorter than normal.
• If the light fails to strike, turn the switch off and wait 5-15
seconds before trying again
• Turn off the light and finish preparing for your dive.
Post-Dive
To ensure years of dependable service from your light, follow the steps below during your
post--dive breakdown.
•
Always rinse your gear after a salt-water dive
•
Before opening the light, make sure you dry any excess water
from the lid and canister interface
•
Check for any water in the canister. If there was any water
intrusion, it is best to detect it early
•
Inspect the cord and switch boot for any damage that may have
occurred during your dive
•
Reinstall the lid assembly to the canister for transport. The
battery canister has sockets for storage and transportation.
Align the banana plugs 180
˚ opposite from the color indexed