36
13. Cleaning and maintenance
Regular cleaning of the combi steamer is of utmost importance.
Only Original recommended cleaner agents may be used.
Please observe the manufacturer's operating instructions.
Caring for the door sealing
A door sealing is subject to wear.
Proper care of sealing prolongs service life.
−
Grease and caustic cleaning agents attack and weaken the sealing material and thereby
accelerate the rate of wear.
−
Chicken and pork grease are very aggressive. Please observe the following care instructions:
−
Manually clean the sealing daily with a mild grease solvent.
−
Use fresh water to remove any remaining cleaning agent.
−
Leave the door open overnight to allow the door sealing to relax.
The door should also be left open when the appliance is not in use.
−
Inspect the sealing regularly for damage.
Replace damaged sealing to prevent steam/air from escaping.
−
The sealing of appliances with autoclean cleaning systems must also be cleaned by hand.
Grease and cleaner deposits often collect on the outer side of the sealing. If these are not
removed, the sealing decomposes at those places.
−
Use original Original cleaner when cleaning.
Cleaning of glass panel
Clean only with a soft cloth. Never use scouring agents.
Cleaning of door glasses
The door is made of two parts. The inner glass can be opened for
cleaning. Clean only with a soft cloth. Never use scouring agents.
Cleaning of outer surfaces
Use fat/grease dissolving cleaning agents or special stainless steel cleaners.
Cleaning of the grease/fat filter
Cleaning the grease/fat filter should be daily routine.
If heavily contaminated we recommend a cleaning bath or cleaning in a dishwasher.
We strongly recommend to work with 2 filters, so that one filter can be immersed
in a cleaning bath or dishwasher, while using the other one. Always rinse it thoroughly with fresh water.
Cleaning of drip trays
Clean both drip trays, the one on the door and the one underneath, at least weekly,
respectively when necessary.
Cleaning the cooking chamber behind the air conducting sheet
Clean weekly respectively according to
contamination.
Switch off the appliance and allow to cool down.
Remove the grease/fat filter.
Remove the hang-in racks.
Remove the fixing screws of the air conducting sheet.
Remove the air conducting sheet.
Clean the drain filter.
Clean the now accessible interior thoroughly.
After cleaning replace all parts removed
in reverse order.
It is not allowed to operate the oven without air conducting sheet!
Do not use either water jet, high pressure sprayer or steam purifier on outer surfaces.
Water jets may damage parts of the appliance or else get in contact with electric live parts.
DANGER – personal injury caused by an electric shock. Do not spray into a hot oven cavity.
Fat filter
Air
conducting
sheet
Hang-in
rack
Fastening
screw
Drip tray
Autoclean nozzle
