EN-33
RDV - RGV - RCV
RBV - RNV - REV
VERTICAL PUMP
ENGLISH
7.
USE
CAUTION!
The pump must only be used for the purpose intended by Salvatore Robuschi & C. S.r.l.
Salvatore Robuschi & C. S.r.l. will not be held responsible for damage caused due to improper use of
the pump.
7.1.
PRELIMINARY INSPECTIONS
The following checks must be performed before commissioning the pump.
•
Check that the pump is positioned on a surface able to withstand the weight.
•
Check the correct position and operation of safety devices.
•
Check that the pump has been connected to the power mains.
•
Check that the power supply phases are correct.
•
Check that the pump is not in "Maintenance"
status.
7.2.
START-UP
Risk
Description and procedural information
Danger of impact/tripping
Risk of impact and tripping on the edges of the machine structure.
It is mandatory to wear appropriate PPE.
Danger of crushing.
Danger of crushing during use.
It is mandatory to wear appropriate PPE.
Danger of impact,
dragging, crushing,
shearing.
Danger of impact, dragging, crushing, shearing during use.
It is forbidden to access the moving parts of the pump during its operation.
It is mandatory to wear appropriate PPE.
Danger of cutting/shearing
Danger of cutting and shearing during unblocking.
It is mandatory to wear appropriate PPE.
Danger of high noise level
Danger of high noise level near the pump during use.
It is mandatory to wear appropriate PPE.
High-pressure fluid
injection or ejection hazard
High-pressure fluid injection or ejection hazard during operation stages.
It is mandatory to wear appropriate PPE.
Danger of burns and
scalds
Danger of burns and scalds during use.
It is mandatory to wear appropriate PPE. (High temperature resistant)
High voltage/electrocution
hazard
Electrocution hazard during use.
It is forbidden to carry out work on electrical components without first
swithcing-off the elecrical power supply.
It is mandatory to wear appropriate PPE.
FORBIDDEN!
No access to persons with active implanted cardiac devices.
CAUTION!
The pump must never run dry.
The pump can only be started if filled with liquid.
CAUTION!
Observe the warnings in the safety data sheets of the liquids to be pumped.
