Salus WT100, Руководство по эксплуатации и установке

Страница: 5 / 28

5
General information
Weather controller WT100 is designed to
control the temperature in the heating circuit
with the valve 3 or 4-way equipped with a
drive-controlled 3-point with the possibility of
connecting additional circulation pump and
control the heat source through a dry contact.
Main functions performed:
 weather control - the preset temperature
heating circuit is determined on the basis
of the programmed heating curve and the
measured outside temperature,
 automatic detection season heating,
 work with a room thermostat
 controling the heat source
 implementation of the return temperature
protection (against low temperature of the
return water) - protection from boiling
water in the boiler (coal boiler) in the
short-circuit of the boiler.
The controller is equipped with a timer (clock
operation is maintained for 48 hours with the
power off the controller).
Regulator is easy to operate in an intuitive
manner. It may be used in households and
other similar premises and in light industry
facilities.
Information about documentation
The regulator manual is divided into two
parts: for user and fitter. Yet, both parts
contain important information, significant for
safety issues, hence the user should read both
parts of the manual.
We are not responsible for any damages
caused by failure to observe these
instructions.
Documentation storage
Please keep this operation and assembly
manual and other valid documentation in a
safe place for future reference. In case of
moving or selling the device, hand this
documentation over to a new user or owner.
Used symbols
The following graphical symbols are used in
the manual:
- useful information and tips,
- useful information concerning
property damage, health or life threat for
people or pets.
Caution: important information were labeled
with the aforementioned symbols in order
make the manual easier to understand.
However it does not release the user nor
installer from responsibility of complying with
requirements which are not labeled with any
symbols!
WEEE Directive 2012/19/UE
Purchased product is designed and made of
materials of highest quality.
The product meets the requirements of the
Directive 2012/19/EU of 4 July 2012 on
waste
electrical and electronic
equipment (WEEE), according to which it is
marked by the symbol of crossed-out wheeled
bin (like below), meaning that product is
subjected to separate collection.
Responsibilities after finishing a period of
using product:
 dispose of the packaging and product at
the end of their period of use in an
appropriate recycling facility,
 do not dispose of the product with other
unsorted waste,
 do not burn the product.
By adhering obligations of waste electrical and
electronic equipment controlled disposal
mentioned above, you avoid harmful effects
on the environment and human health.