SALUPO MULTIPLUS 1 SA684 Series, Инструкция по установке и эксплуатации

Страница: 8 / 24

APPLICATION
COSFI
APPLICATION
COSFI
LANGUAGE
ENGLISH V3.0
LANGUAGE
ENGLISH V3.0
LANGUE
FRANCAISE V3.0
LINGUA
ITALIANO V3.0
APPLICATION
SEWAGE
APPLICATION
CLEAN WATER
APPLICATION
4-20mA bar
APPLICATION
4-20mA metri
PRESSING IT FOR MORE THAN 1s YOU GO OUT
OF THE SETUP AND THE PARAMETERS
ARE STORED IN THE MEMORY
PRESSING IT YOU WILL SEE THE REMAINING PART OF THE PARAMETERS
THAT CAN BE SET ACCORDING TO THE APPLICATION CHOSEN:
COS
φ = SEE CHAPTER 5.2
CLEAN WATER = SEE CHAPTER 5.3
SEWAGE = SEE CHAPTER 5.4
4-20mA bar = SEE CHAPTER 5.5
4-20mA metres = SEE CHAPTER 5.6
COSFI < 0.45
ENTER MANUALLY
COSFI > 1.00
ENTER MANUALLY
THE COS φ MEASURED
IS LESS THAN 0.45
(POSSIBLE DRY
RUNNING)
It is used to scroll forward through the setup pages
It is used to increase the value of a parameter It is used to scroll back through the setup pages
It is used to reduce the value of a parameter
Pressed it allows to enter the selected parameter
Pressed confirms the set value
POSSIBLE ANOMALIES DURING THE AUTO-LEARNING PHASE
}
SETUP PRESS
PAG + MAN 10s
+
IGNITION
CONTROL PANEL
AUTO - LEARNING
ENTER TO START
AUTO - LEARN. 0 %
CF 0.80 13.2 A
AUTO - LEARNING
COMPLETED
5.1 Fast programming
5. PROGRAMMING
Pressed it exits the parameter
ON
IN THIS STAGE THE
MOTHERBOARD STARTS
FOR APPROXIMATELY 30s
THE MOTOR RECORDING
THE PARAMETERS
AUTOMATICALLY
NO LOAD MAXIMUM CURRENT
> -- A
THE MOTHERBOARD
DOES NOT DETECT
ANY CONNECTED
MOTOR
THE MOTHERBOARD HAS
CORRECTLY PERFORMED
THE AUTO-LEARNING
PROCEDURE
THE ABSORBED
CURRENT EXCEEDS
THE MAXIMUM
ALLOWED THRESHOLD
THE COS φ MEASURED
IS MORE THAN 1.00
(COS φ READING
ANOMALY)
28