Tel: 886.909 602 109 Email: [email protected]
39
Command [:]LIST:WIDTh <count>,<time>
1. This command is used to set the delay time of the appointed step in the list.
Parameters:
count
is the appointed step number;
time
is the setup delay time.
Unit: mS
Return command: none
Example:
If sending command
[:]LIST:W
IDT
1,2000
, it means to set the delay time of the first step of the list file as
2000mS.
2. Related command
[:]LIST:WIDTh? <count>
, it means to query the delay time of the appointed step in
the current list.
Return parameters: <time>
--- END OF DOCUMENT ---
