Tel: 886. 909 602 109 Email: [email protected]
www.salukitec.com
51
Single and loop sample mode both control sampling to start, stop or reset through the buttons in CONTROL area.
3.8
[AUX OUTPUT]
There are 4 options in the [AUX OUTPUT] submenu, including <DA1 Output>, <DA2 Output>, <DA3 Output> and
<DA4 Output>. These 4 options are corresponding to the 4 AUX_DAC output. The output range is
±
10V and the
output is 0.000V in default. The interface is shown in Fig.38.
Fig.38 [AUX OUTPUT] Submenu
<DA1 Output>
The first channel output of AUX DAC, corresponding to AUX_DAC1 on rear panel.
<DA2 Output>
The second channel output of AUX DAC, corresponding to AUX_DAC2 on rear panel.
<DA3 Output>
The third channel output of AUX DAC, corresponding to AUX_DAC3 on rear panel.
<DA4 Output>
The forth channel output of AUX DAC, corresponding to AUX_DAC4 on rear panel.
3.9
[SYSTEM]
[SYSTEM] submenu includes the system information and settings of SE2031, like instrument information, screen
brightness and the settings of RS232 communications, as is shown in Fig.39.
