Saluki S3531 series, Руководство пользователя

Страница: 63 / 71

Tel: 886.2.2175 2930 Email: sales@salukitec.com
www.salukitec.com
51
drivers are saved in the installation directory folder. (default path is C:\Program Files (x86)\SALUKI\SALUKI SARemoteControl\USB
Driver\usb2030). Please select the driver based on your operation system.
3) Check the device status
Open Device manager and check the device status. If the driver is installed successfully, it will under NI-VISA USB devices, please see the
screen shot below:
4) Telecommunication
Double click SARemoteControl software. Select USB table and click connect. No warning pops out and S3531 is connected. User can type
in SCPI command to control or fetch data.
7.3.2 LAN connection
S3531 can be connected to LAN, user can use the Saluki remote control software to manage S3531. LAN connection not only provide
SCPI command control, but also provide a UI. It is a mapping of the keys and display of the S3531.
1) Connect S3531 into LAN
Use CAT6 cable connect S3531 to a LAN or to PC directly.
2) Set PC and S3531 in the same sub-network
For example, set IP address to 192.168.1.1 (255.255.255.0), set S3531 IP address to 192.168.1.2 (255.255.255.0)
3) Double click the software icon
Fill S3531 IP address, use default port number and delay. Then click “Connect”