Tel: 886.2.2175 2930 Email: [email protected]
www.salukitec.com
10
2
Safety Instructions
Please read safety instruction carefully and Strictly follow
！
We will spare no efforts to ensure that production process comply with latest safety standards so as to safeguard the safety of
our users. The design and tests of our products and accessory equipment comply with relevant safety standards. We have
established quality assurance system so that we can better supervise product quality and ensure that all products accord with
standards in the system. To maintain the sound state of equipment and ensure safe operation, please comply with the following
instruction. Contact us if you have any questions.
It is also your responsibility to use this product in correct manner. Suitable for industrial, laboratory and field uses, this equipment,
however, must be used in correct manner so as to prevent personal injuries and property damages. For problems caused by
misuses, liabilities rest on users. By proper use, it means that users should use this product according to prescriptions in the
product document and in the required conditions. As sufficient expertise is required, only professional technicians and people
that have been strictly trained and have mastered necessary skills are qualified to use this product. Please keep safety manual
and product document in a proper manner, and deliver them to the end user. To forestall personal injuries and property loss,
please abide by these safety instructions. Prior to using this product, please read carefully and comply with these instructions
accordingly.
2.1
Device safety
1)
Use designated packing container in shipping and avoid falling or violent collisions in moving, which may cause damages
to the device.
2)
Use AC-DC adapter/ power cord shipped with the device to supply power/charge to the product. Using other power
adapters/power cord may cause damages to internal hardware.
3)
Ensure that power supply is well connected to the ground to prevent damages to the device caused by poor connection or
false connection.
4)
Injection of DC signal into input end is prohibited. Signal power needs to be lower than 0.5W. If not, damage to the device
may occur.
5)
Both insertions of objects into the gap of the device housing and dumping of liquids over device housing or into device are
prohibited, which may cause short circuit, electric shock, fire or personal injuries.
6)
Notches or gaps in the device, designed to help internal ventilation and whereby prevent overheat, must not be covered.
The device must not be put on couch, wrapped with carpet, or placed in airtight housing unless ventilation is good
7)
This device must not be placed on radiator, dish heater and other heating devices. Ambient temperature must not surpass
the maximal temperature prescribed in this manual
8)
Attention: Once this device is on fire, it may release toxic gases or liquids.
9)
Please do not disassemble the instrument without permission
10)
If any unusual phenomenon like smoke, smell, sparkle etc, occurs during start up, operation, please immediately turn off
the instrument, cut off the power and contact Saluki.
11)
Keep good ventilation and do not block the vent holes on the instrument. Check and clean the vent holes during routine
maintenance.
12)
Operate and store the instrument in the environment as required. Explosive matters are strictly forbidden
13)
Pay more attention to ESD protection. Please use conductive mat and wrist ring during operation
Содержание S3531 series
Страница 1: ...S3531 Series Spectrum Analyzer User Manual Saluki Technology Inc...
Страница 32: ...Tel 886 2 2175 2930 Email sales salukitec com www salukitec com 20 Fig 5 15 TOI Distortion Measurement...
Страница 46: ...Tel 886 2 2175 2930 Email sales salukitec com www salukitec com 34 6 11 Meas...
Страница 71: ...Tel 886 2 2175 2930 Email sales salukitec com www salukitec com 59 9 Appendix A Programming Manual...
