Tel: 886.2.2175 2930 Email: [email protected]
43
As shown above, acquire input signals (cycle repeatable) for more than once at a slow sample rate, arrange the
sample points by the time they appear, then recover waveforms.
5.5.4
UTILITY System
Push the UTILITY button to display the Utility Menu as follows.
Options
Comments
System Info
Display the software and hardware versions, serial number and some other information about the oscilloscope.
Update Program
Insert a USB disk with upgrade program and the disk icon at the top left corner is highlighted. Press the Update
Program button and the Software Upgrade dialog pops up. Push F6 to upgrade or push F2 to cancel.
Save Waveform
Insert a USB disk and the disk icon at the top left corner is highlighted. Click on this icon and you can see the waveform
pause for a while, being saved. You can find the saved waveform data under the pic_x folder in the USB disk. Here X
represents how many times you press the button. Each press generates a corresponding folder. For example, press
once and a folder pic_1 is generated; press twice and two folders pic_1, pic_2 are generated.
Self Calibration
Press this option and the Self Calibration dialog pops up. Press F6 to perform the self calibration. Press F4 to cancel.
Keypad Beep
Turn on or turn off key beep.
GUI Language
Set the language
GUI color
Set the GUI color, bule, black, green, pink, yellow.
Time
Set the time setting.
Sys Status
Display the system status.
Pass/Fail
Pass/Fail function
Recorder
Turn on record function.
Filter
Print Cfg
Set print configuration
Option
Video
Bode Assiant
Wave
Input repeated
First Acquisition
Second Acquisition
Third Acquisition
Fourth Acquisition
