Tel: 886.2.2175 2930 Email: [email protected]
39
Options
Settings
Comments
CH2 off
MATH off
REF
RefA
RefB
Select the reference location to store or recall a waveform.
Operation
Save
Save the source waveform to the selected reference location.
Ref on
Ref off
Display or remove the reference waveform on the screen.
Press ‘Next Page’ to recall the following menu.
Options
Settings
Comments
Setups
Operation
Source
Flash memory
USB disk
Store the current setups to the USB disk or the memory of the oscilloscope.
Memory
0 to 9
Specify the memory location in which to store the current waveform settings or from which to recall the
waveform settings. Use the V0 knob to select.
Operation
Save
Complete the saving operation.
Recall
Recall the oscilloscope settings stored in the location selected in the Setup field. Push the Default Setup
button to initialize the oscilloscope to a known setup.
See below for waveform menus.
Note: The oscilloscope will save the current settings if you wait 5 seconds after the last modification, and it will recall
these settings the next time you power on the oscilloscope.
5.5.2
Measurement
Push the MEASURE button to perform auto measurements. There are 11 types of measurements and up to 8 can be
displayed at a time.
