Salter EK1847, Руководство пользователя

Страница: 8 / 24

8
Assembling the Pressure Cooker
Make sure that the Pressure Cooker is unplugged from the mains power supply and
turned off.
Place the non-stick bowl into the outer housing of the Pressure Cooker, turning it
slightly to ensure that it is sat perfectly.
Fix the sealant washer into the correct position on top of the Pressure Cooker
housing, then place the lid onto the Pressure Cooker and twist it anticlockwise until
it locks in place.
Make certain that the steam vent hole of the pressure release valve is not blocked.
Put the pressure release valve into the ‘seal’ position,
checking that the floating valve is in the down position.
Plug the Pressure Cooker into the mains power supply and turn it on by selecting
the required cooking mode.
Note: If the sealant washer is not in the correct position, steam will be able to
escape and pressure cannot build up.
Warning: Do not place food directly onto the heating base; always use the non-
stick bowl.
Pull up
Floating
valve
Press down
Press down
Floating
valve
Press down