GB
5
GB
4
Replace battery.
Weight exceeds the
maximum capacity.
WARNING INDICATORS
PERSONAL DATA ENTRY
The human body is made up of, amongst other things, a percentage of fat.This is vital for a healthy functioning
body – it cushions joints and protects vital organs, helps regulate body temperature, stores vitamins and helps the
body sustain itself when food is scarce. However, too much body fat or indeed too little body fat can be damaging
to your health.
Hence the need to be able to calculate and monitor body fat percentage.
This product is not a medical device. It is intended for home use only.
The Salter Body Fat Computer is calibrated for adult use (age 18+ years).
It is not suitable for use during pregnancy, for athletes undertaking more than 10
hours of intensive training a week, or for children.
BODY FAT - WHAT DOES IT MEAN?
The body fat percentage is calculated by means of a bio-algorithm, based on scientific research from clinical studies.
The users age, sex, weight and height are processed using the bio-algorithm to calculate the body fat percentage and
relative category (‘low’, ‘normal’, ‘high’ or ‘very high’).
Unlike a Body Fat Analyser, which sends an electrical current through the body (BIA method), this product is safe to
use if you have a pacemaker or similar device fitted.
HOW DOES THE BODY FAT COMPUTER SCALE WORK?
TECHNICAL SPECIFICATION
Battery: 2 x CR2032
lithium batteries.
Remove isolating tab.
/- terminals
are correct way round.
BATTERY
NB - If scale is set to KG mode, height will be
displayed in cm. If set to ST or LB mode, height will be
displayed in feet and inches.
WEIGHT MODE
Weight range:
150kg x 100g
23st 8lb x 1/4lb
330lb x 0.2lb
Height range:
100cm – 220cm x 1cm
3’ 3.5" – 7’ 2.5" x 0.5"
Body fat range:
To 99.9% x 0.1%
User Memory:
5 plus 1 ‘guest’ memory
Batteries:
2 x CR2032
lithium batteries
•
Weigh yourself at the same time of day, before meals and without clothing or footwear.
First thing in the morning is a good time.
•
Placing your scale on a hard even floor will ensure the greatest accuracy and repeatability.
•
For use on carpet, attach enclosed extension feet.
•
Clean your scale with a damp cloth. Do not use chemical cleaning agents.
•
Do not allow your scale to become saturated with water as this can damage the electronics.
•
Treat you scale with care – it is a precision instrument. Do not drop it or jump on it.
ADVICE FOR USE AND CARE
The Salter Body Fat Computer has 6 memories. Memories ‘1 – 5’ are for regular users. Personal data in these
memories will be stored for repeat use.
Memory ‘0’ is for use by a guest. Personal data in this memory will not be stored for future use – it must be
programmed each time it is used.
SETTING A PERMANENT MEMORY (1-5)
a) Vibration activates your scale.
b) Press the SET key.You will see a small ‘0’ flashing at the top left of the display.
c) Use the
▲
or
▼
key to select memory 1-5 to which your personal data will be saved.When complete press
the SET key to confirm.
d) The current default height will be displayed flashing. Use the
▲
or
▼
key to input your height.
When complete press the SET key to confirm.
Tip - when adjusting age or height you can increase the rate at which the value displayed changes by pressing and
holding the
▲
or
▼
key down.
e) The current default age will be displayed flashing. Use the
▲
or
▼
key to input your age.
When complete press the SET key to confirm.
f)
The current default gender will be displayed flashing. Use the
▲
or
▼
key to input your gender.
When complete press the SET key to confirm.
Before entering your personal data you will need to select a memory number to which your personal data will be
saved.You will then enter your height, age and gender:
TAP!
