3
Mounting the Unit
1. Mount bracket to wall using (2) screws that
are appropriate anchors for the surface
being mounted to.
2. Lower control panel into mounted bracket.
Insert flat tip screws (included) through
round holes in mounting bracket and drive
the screws into existing threaded holes in
lower half of control panel to secure control
panel to bracket.
YOUR
SCALE
IS NOW
READY
FOR
USE.
Display and Function
General Operation
POWER ON
To turn the scale on, press the button marked
“ON”. The display will first show “
” for
approximately two (2) seconds, then display
“ ”. This indicates that the scale is ready for
use.
WEIGHING
When the display shows “ ” it is ready to weigh
an object. If the object exceeds the capacity of
the scale by more than 5%, the display will show
“
oooo
”.
Until the overload condition is reached, objects
can be placed on the platform, with the display
showing the total weight of all objects on the
platform.
TARE OPERATION
To tare (zero out) a load on the platform (i.e.:
the weight of a container), press the button
marked “TARE/HOLD” one time. When this is
done, the display will show the value “ ”. This
could be followed by the addition of another
load, if so desired. The display will show the
sum of all additional loads above and beyond
the tared load.
TARE CAPABILITY
A load of up to the capacity of the scale can be
tared (zeroed out).
When a load is tared, an additional load up to
the full capacity of the scale can be weighed.
Example:
A Model 150 has a capacity of 150
lbs if a load of 20 lbs on that scale is tared
(zeroed out), an additional load or loads of up to
130 lbs can be weighed.
.
