2
Congratulations on your purchase of the Digital
Receiving Scale. Your Digital Receiving Scale
is an example of superior design and
craftsmanship. In order to optimize its function,
be sure to read this instruction manual carefully
before use. Keep instructions handy for future
reference.
Description of Parts
Model PS150/PS400
Main Features
LCD Display
1” digit size displays weight.
Tare/Hold Button
When pressed, one time the scale will tare
(zero out) the load on the platform. When
pressed and held for 2/3 seconds any load
on the scale will continue to show on the
display even after the load has been
removed.
Units Button
When pressed, converts the displayed
weight from pounds to kilograms, or from
kilograms to pounds.
ON Button
When pressed turns scale “ON”.
OFF Button
When pressed turns scale “OFF”.
Auto Shut Off
Powers off after 2 minutes of nonuse.
Before You Begin
1. Remove scale from its box along with
control panel and the 120V Adapter.
2. If using the 120V Adapter, plug one end into
the receptacle (connector) at the rear of the
scale. Insert the other end (the adapter)
into a 120V outlet.
Battery Installation
The Digital Receiving Scale operates with (6)
“AA” batteries (Alkaline preferred).
1. Place unit upright on a flat surface and lift
platform from top of scale.
2. Remove battery compartment door and
insert batteries into compartment. Make
certain to observe the correct polarity.
3. Replace compartment door and platform
cover on scale.
Auto Shut-off Feature
This feature makes the scale shut-off after 2
minutes of nonuse to conserve the battery. You
can disable this feature and the scale will
operate continuously.
1. With the scale off, press the “UNIT
CONVERSION” button and hold down.
2. Press and hold “ON” button, while holding
the “UNIT CONVERSION” button down.
3. The display will show “
” and then “
”
will appear. The auto-off feature is now de-
activated. Release the buttons.
4. To make the auto-off active again, repeat
step 1 and 2 and “
” will appear. The
auto-off is now functional.
