Page 5 - 2
Newer units only
NAME/CODE
DESCRIPTION
CODE/VALUE
A10
Handshaking
Enable
Enables hardware handshaking for Print Ticket Mode. Valid only
when
A6
is set to “1”.
"0" = Disable Handshaking
"1" = Enable Handshaking
0
1
A11
Print Header
Tells MP-20 printer to print the header information. Valid only when
A6
is set to “1”.
"0" = Do NOT Print Header
"1" = Print Header
0
1
5.2
USER MENU PROCEDURES
This section provides instructions for all of the User Menu procedures.
5.2.1
ID Number Entry (A8)
1.
While in the User Menu mode, scroll to "
A 8
", then scroll down once using
the #2 key to enter the ID Number menu.
2.
The display will momentarily show "
ET
ID
", followed by the current ID
number value.
3.
Use the front panel numeric keys to key-in the actual ID number value. If
you make a mistake, press the ZERO key to clear your entry and start over.
4.
After setting the exact value, press the NET/GROSS key to save the ID
Number value. The display will show "
E ID
" momentarily, then revert back
up to A8.
5.2.2
LF (Line Feeds) Number Entry (A9)
1.
While in the User Menu mode, scroll to "
A 9
", then scroll down once using
the #2 key to enter the Line Feeds menu.
2.
The display will momentarily show "
ET
LF
", followed by the current line
feeds value.
3.
Use the front panel numeric keys to key-in the actual ID number value. If
you make a mistake, press the ZERO key to clear your entry and start over.
4.
After setting the exact value, press the NET/GROSS key to save the line
feeds value. The display will show "
E LF
" momentarily, then revert back up
to A9.
