background image

1

Installation Manual

Stainless Steel 
Self-Contained Hopper Spreaders

CAUTION

Do not overload vehicle beyond the vehicle’s Gross 
Vehicle Weight Rating (GVWR) or Gross Axle Weight 
Ratings (GAWR).  Check the vehicle’s load rating cer-
tification sticker for maximum vehicle capacity. 

Table of Contents

Warranty Information .................................................. 1

General Information ................................................. 1-2

Safety Precautions ..................................................... 2

General Installation .................................................. 2-3

Installation Instructions - Gas Models .....................3-4

                                      - Hydraulic Models ............... 6

Chute Installation ........................................................ 5

Spreader Operation - Gas Models .......................... 4-5

                                 - Hydraulic Models ................. 6-7

Chute Operation ......................................................5-6

Spreader Maintenance ............................................ 7-9

Optional Equipment .................................................... 9
Repair Parts & Drawings ......................................10-16

Spreader Models and Specifications

MODEL #

  

POWER

HOPPER 

LENGTH

OVERALL

 

LENGTH

OVERALL

 

WIDTH

EMPTY

WEIGHT

CAPACITY

1400455SS

Gas

96"

115.9"

58"

1,395 lbs.

2.5 yds.

1400460SS

Gas

108"

127.9"

58"

1,460 lbs.

2.75 yds.

1400465SS

Gas

120"

138.9"

58"

1,526 lbs.

3.0 yds.

1400475SS

Gas

96"

116"

70"

1,470 lbs.

3.0 yds.

1400475SSH

Hydraulic

96"

116"

70"

1,405 lbs.

3.0 yds.

1400500SS

Gas

108"

128"

70"

1,500 lbs.

4.0 yds.

1400500SSH

Hydraulic

108"

128"

70"

1,435 lbs.

4.0 yds.

1400550SS

Gas

120"

140"

70"

1,560 lbs.

4.5 yds.

1400550SSH

Hydraulic

120"

140"

70"

1,500 lbs.

4.5 yds.

 General Information

1.

 

Recommended Vehicle Requirements:

This spreader is to be used on trucks with dump 
bodies or flat bed trucks with a Gross Vehicle Weight 
Rated chassis of 15,000 lbs. or greater.

SPREADER WARRANTY INFORMATION

 This warranty replaces all previous warranties and no employee of this 
company is authorized to extend additional warranties, or agreements, or 
implications not explicitly covered herein.

Buyers Products Company warrants all parts of the product to be free from 
defects in material and workmanship for a period of one (1) year, excluding 
the gasoline engine, from the date of installation. Parts must be properly 
installed and used under normal conditions. Normal wear is excluded.

Any part which has been altered, including modifications, misuse, accident, 
or lack of maintenance will not be considered under this warranty.  

The sole responsibility of Buyers Products Company under this warranty is 
limited to repairing or replacing any part(s) which are returned, prepaid, 30 
days after such defect is discovered, and returned part(s) are found to be 
defective by Buyers Products Company.

Authorization from Buyers Products Company must be obtained before 
returning any part. The following information must accompany defective 
parts returned to Buyers Products Company: RMA#, spreader model, serial 
number, date installed, and distributor from whom purchased.

Buyers Products Company shall not be liable for damage arising out of 
failure of any unit to operate properly, or failure, or delay in work, or for any 
consequential damages. No charges for transportation or labor performed 
on any part will be allowed under this warranty.

The gasoline engine is solely warranted through engine’s manufacturer. All 
engine related warranty claims are to be processed through the engine’s 
manufacturer. This information is explained in the engine owner’s manual.

2.

 Average Material Weights:

  MATERIAL 

WEIGHT (POUNDS PER CUBIC YARD)

  #1 Rock Salt 

950

  #2 Rock Salt 

1,215

  Coarse Sand - Dry 

2,565

  Coarse Sand - Wet 

3,240

9049 Tyler Blvd. • Mentor, Ohio 44060

Phone (440) 974-8888 • Fax (440) 974-0165

Toll-Free Fax 800-841-8003 • saltdogg.com

Содержание 1400455SS

















Отзывы: